Pinguino bootloader

1 reply [Last post]
Sat, 2010-06-19 16:34
wimh
Offline
Member since: 2009-08-12

Hi guys,

I managed to get the Pinguino bootloader running on the Dwengo board. It's based on the Pinguino bootloader V2.12, but with the correct pinout using LED LD0.

You'll need either a Dwengo programmer or some other PICKIT2 or XWISP to program your PIC, but after that you use the Pinguino IDE External link on your Dwengo board!

pinguino-bootloader-v2.12.hex

Top
Tue, 2010-07-20 19:23
#1
Michiel
Offline
Member since: 2009-04-17

Great!

Top